Case Studies

Engineering scenarios, end to end

Problem → requirement → manufacturing solution → inspection → outcome. Client identities stay anonymous unless publication is explicitly approved.

Semiconductor & Advanced Laser · Scientific Instruments

Precision Copper-Aluminum Brazed Housing

A copper base plate joined to a CNC-machined aluminium frame by a low-temperature process, combining copper's heat transfer with aluminium's low weight and machinability…

  • Tolerance Flatness, cavity and mounting-hole position per drawing (checked after joining)
  • Dimensional inspection (post-join) + joint / leak test where specified
Explore

Semiconductor & Advanced Laser · AI Liquid Cooling & Robotics

Macro-Channel Water-Cooled Heat Sink for High-Power Laser Diodes

A macro-channel liquid-cooling heat sink route for high-power laser diodes, balancing heat removal, pressure drop and reliability through precision channel machining, copper machining, brazing/sealing…

  • Tolerance Channel cross-section/position per drawing; sealing-face flatness per drawing
  • Dimensional inspection + leak / proof-pressure / flow test
Explore

Semiconductor & Advanced Laser · AI Liquid Cooling & Robotics

Precision Copper Microchannel Heat Sink: Fine Channels to Leak-Tight Reliability

A dense internal-channel copper heat sink that concentrates fine-channel machining, thin-wall stability, burr control, joining, cleaning and leak-tight verification into one manufacturing problem.

  • Tolerance Channel width/pitch per drawing; flatness per drawing
  • Dimensional inspection + leak / proof-pressure test
Explore

AI Liquid Cooling & Robotics

Aluminum Cold Plate for an AI Server Rack

machined-channel cold plate with flat mounting faces and leak-tested joints.

  • Tolerance ±0.005 mm flatness (contact face)
  • CMM + pressure leak test
Explore

Project review

Use a case to define your requirements

A published case describes a particular component and inspection scope. For a new part, provide the material, drawing revision, critical interfaces, quantity and acceptance criteria; a previous result does not establish the same limits for a different design.

Request a Quote

Have a drawing or technical requirement?

Upload your drawing and tell us your material, tolerance, quantity and application. Our engineering team replies within 1–2 business days.